To increase your turn capability, install the wedge risers so the thick part is closer to the center of the board. You can also flip the direction of your wedges to create different effects. For example, if you face both angled risers so the thick part faces the center, you can increase front turn capabilities while decreasing rear turn capabilities.
Both angled and rectangular risers are available in drop-thru style. Many manufacturers have also put a creative spin on riser pads in the last few years by adding interesting design cutouts on their riser pads. Not only does it look cool, but it also decreases the total weight of your skateboard. Additionally, some skateboarders like to mix and match rectangular and angled riser pads.
For instance, an angled riser with thick part facing the center and a flat riser on the back can increase your front turn steering capabilities while stabilizing the back, and vice-versa. Be aware that no matter what riser pad shape you choose, you will need to buy longer hardware to accommodate the extra height!
Consult our helpful hardware size calculator above. When you install riser pads, you of course want to install four screws, one on each corner.
However, you might notice that there are a total of six holes in skateboard riser pads. Why is this? Manufacturers conveniently put an extra set of holes in most riser pads to accommodate both new school and old school skateboards.
Lifting the board away from the trucks automatically increases the distance from the top of the wheels to the bottom of the deck. Wheel bite prevention. The bottom of the deck gets gradually closer to the tops of the wheels as you lean into a turn.
Lean too far and the wheels can rub on the surface of the deck, acting like brakes. This is called wheel bite. Do not ignore those black marks burned above your wheels.
Sooner or later, wheel bite will stop you cold and throw you to the concrete. Risers increase the space between the wheels and the deck, preventing the board from contacting the wheels in the first place.
Allows room for taller wheels. There are many reasons to consider opting for taller wheels. For one, taller wheels cover more ground per rotation than shorter ones. That means more speed and less pushing — all other things being equal. Taller wheels also last longer, as there is more urethane to wear down. Allows sharper turns. If you skate with large wheels or low trucks, the distance between the wheels and the deck is smaller. Landing tricks and hard turns can create this unpleasant meeting of deck and wheel, leading to a very abrupt and likely painful stop.
Through the use of pads you increase the distance between your deck and wheels, impeding annoying wheel bites. Should you however use larger wheels or prefer very soft steering, shock pads can be a huge help.
These are what we call Angled Riser Pads. However, this type of riser pad is generally used for longboards and cruisers. They change the angle at which your trucks are mounted on the deck, thus altering the steering behaviour of your skateboard.
You can learn more about that in our longboard section. If you do choose to skate with shock or riser pads, you should ensure that the bolts in your mounting kit are the appropriate length. The higher your shock pads, the longer your bolts should be. You might be injured seriously. However, riser pads increase the height and prevent wheel bites. So, you can safely take a sharp turn on your skateboard. Wheel rubs the deck during wheel bite. As a result, the deck gets damaged quickly. As the riser pad prevents wheels bite, it also increases the durability of the skateboard deck.
Each truck is directly attached to the board through four heavy screws. The hard metal of the truck is connected to the soft material of the board. As a result, it causes stress and damages the board with the use. The riser is placed between the truck and the board. So, it reduces the stress. The riser pads increase the height of the skateboard. Therefore, few skateboard tricks are going to be difficult to do for skaters. As you know, the riser pads increase the height of the skateboard.
Moreover, there are many alternatives to skateboard riser pads. If you are not comfortable with the riser pads, you should go with the other options. Needless to say, it is a crucial question for every skater. Most experienced skaters use riser pads to prevent wheel bites.
0コメント